Відео

Thank you so much. I've been struggling to remove the hinges on my oven door for hours and the other videos did not work as they weren't double hinged. I'm very happy |I found your video

After seeing your video I decided to purchase the bearings and do it myself. Followed your instructions today which were very helpful and now I have a much quieter washing machine on its spin cycle. Awesome video - thanks very much.

No shit this worked, all I had to do was wiggle the plug around lmao

From where i can buy the fan of this model

Regarding your F&P if you do find a board for it make sure you carry out the tests shown in this video here ua-cam.com/video/5GPBq3XKZMk/v-deo.htmlsi=MzXtp6Hu75JdUD7P before you do put a board in it, your machine is a Phase 4, if you keep an eye on trademe a board for it might pop up.

That's nice to know because I just fitted a good used motor control board into a Fabric Smart LCD model which my sister washes her horse rugs in because of a 112 fault code which is due to a faulty control board. Water did get into the old board but now I am getting warning code 2 & fault code 136 & now I only have continuity between 2 phases so tomorrow I will pull the windings out & check the star point. The shaft isn't locked solid & it's also showing up as having an overload fault in it. It's an 8 kilograms model & my parents retired it to washing horse 🐴 rugs & they bought a 10 kilogram Fisher & Paykel front loader which uses much less water,it doesn't go out of balance & it comes with its own heating element which means no more running out of hot water when a huge amount of washing needs to be done, it's a beauty !

Worked brilliantly. Has been so frustrating, who would have thought that it was such an easy fix. Appreciate

I have the same model... i brought it second hand from a friend who had it since new and looked after it then i got it bout 4 weeks into havimg the fridge/freezer the beeps start.. still there freezer is good fridge is barley cold i will check what u have shown me and i will let u know if this is also my problem u expained this video so well that i dont have to watch it again to know what im doing thank you for that

I took mine off but now it's not staying shut no spring action . Does the top part have to be on tracks or latched on to something in there to stay?

Hi Paul, I will be trying this to our W/M. May I know if the transistor is a mosfet or a triac?

hi paul great advise with your video it has worked keep your work up

Is this also the thermostat on that active smart is it

Better than will be by video. Thanks you.

Thank you so much! 🙏

Wonderfully straightforward instructional video. Probably takes a bit more time to type out instructions that are logical than to burble on and on for 20 minutes while you are doing the job, so well done. One of the best videos, and yes, it was a hairclip!

Thank you, great tip !

Hi there, just wondering if you’d have any idea what the issue could be - if I have already replaced the OOB box & the problem still persists??

Thank you so much

Thank very much for the clearly explained video.

been fixing W/M myself for like 9 years now - i only self leant.. This video has giving me a more indeepth look at the TECH side of it.. thnx Paul P

Great fix ... still working for me 4 years later ... toes and thumbs up.

thank you very much

thank you so much.

I'm onto my 3rd time doung this. 1st time it was fine for 2 weeks then it didn't rinse and spin again. Then I did the same thing again. I'm waiting until it gets cooler in my town in case I have to spend time scooping water out again. Could it be the pump ? Probably not since I got it workings again 1st time.

You helped this guy, so thank you!

Wow.... Thanks. I was able to repair my washing machine

i changed the fan as you said but still beeping every aproxamitly 12 hr , any idea why

Thank you!!!! Worked!

Saved my butt I had put my wedding ring in the ash tray and it somehow got stuck behind the console.

Why does this work??

Great vid, Thank you so much for posting this, helped me fix my machine easily.👍

i tested as you did. i've got short circuit. does my glow plug ok ?

If your shaft doesn't come all the way through the rear bearing (and you can fit the pulley onto the shaft); fit the bolt to the shaft and start turning. The pulley will act as a washer and you will pull the shaft back to where you want it. When it is in position you can torque the rear nut. I suggest a bit of lock tight on the threads too.

Genius solution mate.

The hammer trick worked for me, after getting error 56 with 3 green lights showing - 00111000. No bearings changed but I did recently pull the machine apart to clean. Thank you

My E1 was solved by cleaning the drain filters

Happy New Year 2024

شكرا جزيلا ساجرب

Jeepers, you need a third arm aka a helper to hold the video cam - I'm feeling seasick :) The hint on using a piece of 40mm DWV pipe to seat the seal was very useful though !

Hey mate just wanna say I have a different washer but this helped me get to my pump and there was 11¢ that blocked it. I was able to fix it myself and now I just need to get a hose clamp on one end. Thanks again

Helped a shit ton, cheers mate.

Thanks for the great help.

Thank you. Fixed my washing machine with your instructions.

Hi Paul I have a fisher and paykel mw612 made in August 2006 I have just replaced the seized bearings now every time I plug the washing machine in it shows the same error code in this video and the water valves seem okay I need to know how to get a motor control unit (it doesn’t have the pressure tube on it it’s in front of the solenoids)

Same shit Here. New heater fault 03

Great video!!! Thanks a lot!!!

Very helpful, thank you

god fisher and paykel is rubbish

Im just here cuz South Park

Hey Paul, I have a heater reading e 3, only been used mabey 8 times, now reads these error. It ohms at 5.6. Is there something else I should check.